PREVENT THERMAL RUNAWAY,
AVOID DANGEROUS BATTERY FIRES
AVOID DANGEROUS BATTERY FIRES
Thermal runaway is one of the primary risks related to lithium-ion batteries. It is a phenomenon in which the cell enters an uncontrollable, self-heating state. It can be caused by shock, heat, over charging and degrading batteries.
This can result in ejection of gas, shrapnel and/or particulates (violent cell venting), extremely high temperatures, highly toxic smoke and fire.
Introducing LifeSafe Thermal Management Fluid (TMF) - our ground-breaking, patent-pending coolant solution that prevents the deadly threat of thermal runaway by significantly reducing the transfer of heat within a battery pack. The TMF is non-toxic, non-hazardous and importantly non-corrosive, a significant leap forward in the efforts to better control battery fires and overheating in a safe and more sustainable way.
The use of lithium-ion batteries is not a new phenomenon, however, their use has increased rapidly in recent years, most notably in the technology and transport sectors in such products as phones, laptops, cordless tools, electric cars, e-scooters and e-bikes. They will soon also be used more frequently in the home as power storage systems.
With an increasing number of devices and industries around the world utilising the power and efficiency of lithium batteries, there is a need for a new approach to controlling and managing the heat build-up within a battery.
In the case of overheating battery packs, there are two stages of possible intervention - Pre-Trauma and Post-Trauma. Pre-trauma describes the point where overheating has taken the batteries into propagation or thermal runaway. Post-trauma describes the point where the batteries ignite and dangerous gasses are vented from the battery pack.
LifeSafe Technologies’ Thermal Management Fluid (TMF) is a new and unique coolant fluid designed specifically to deal with the growing issues surrounding lithium-ion battery fires. TMF is a dielectric coolant fluid which is non-toxic, non-hazardous and importantly non-corrosive fluid with a flash point of over 225 degrees centigrade. Most common dielectric fluids offer insulating properties measured at 299 mOmhs. LifeSafe TMF goes above and beyond the competition, measuring 999 mOmhs. Our unique Thermal Management Fluid has been proven to significantly reduce the thermal transfer of heat within the battery pack and prevent thermal runaway from even starting. LifeSafe TMF is capable of being utilised in pipework surrounding batteries or injected directly into the batteries themselves. A highly effective use of TMF would be in the early prevention of electric vehicle lithium-ion battery fires. For instance, if a sensor registers a battery overheating, a direct injection of TMF can be administered to the batteries to prevent initial ignition and cease any thermal runaway.
TMF is made of a mix of components that combine to rapidly cool the core temperature of a cell below ignition point. Most dielectric fluids are mineral-based, highly toxic and often only 30% bio-degradable, whereas TMF is 75% bio-degradable, non-toxic, non-hazardous and non-corrosive. LifeSafe Technologies fluids are some of the most eco-friendly extinguishing solutions available.
Thermal Runaway is a result of an incident or trauma that occurs within the battery. It builds up a rapid energy within the battery which is then released in a form of heat causing a Exothermic reaction. Watch the video to find out more.
Thermal runaway is one of the primary risks related to lithium-ion batteries. It is a phenomenon in which the lithium-ion cell enters an uncontrollable, self-heating state. It can be caused by shock, heat, over charging and degrading batteries. Watch the video to find out more.